What Are Septic Tanks
Septic tanks are essential in maintaining a healthy living environment on your property. It is vital to know the proper way to install a septic tank since there are many precautions that need to be taken before and during the installation process. Keep reading for more information about how septic tanks are installed!
A septic tank is an underground container where wastewater from toilets, sinks, showers, baths and washing machines goes so it can decompose naturally. Septic systems use bacteria to break down organic material in sewage-contaminated water by using natural processes of fermentation and aerobic decomposition.
A properly working system will not smell bad or cause any health problems with people who come into contact with it. However, if you have noticed that your septics system is not working properly, then it might be time to contact a professional septic contractor who can take care of the problem. They will service your tank and offer you additional help if necessary. Septic Tanks Northwest are experts when it comes to the installation of these large tanks.
Who Needs A Septic Tank
If you live in an area where there is no system available for sewage removal, you will need to have a septic tank installed so that wastewater can be properly disposed of. It is important to have a septic tank installed by a professional contractor who knows what they are doing. Septic tanks should not be installed in areas where the water table is high, as this could cause the tank to fill with water and overflow.
The installation process for a septic tank usually starts with excavating a hole that is large enough to accommodate the septic tank. The hole should be dug on level ground, and it is important to make sure that the area around the hole is stable so that the tank does not sink over time. Once the hole has been dug, the septic tank can be lowered into it and should be levelled using a spirit or water level. If your soil is sandy or loose, it is important that the sides of the hole are reinforced with gravel or rock to prevent side slumping.
Once your septic tank has been installed in its final location, it will need to be connected up to all of the building drains in your house. It should have a drainage pipe on either side so that wastewater can flow out of it. The system needs to be carefully inspected by pouring water into the drains until there is at least 12 cm over the floor level inside of the tank. Once you have done this, then you can adjust all connections until you have made them air-tight.
Once everything has been set up correctly, all-access openings need to be sealed off using concrete or mortar grouting. You should also make sure that all areas where the tank will be overgrown with vegetation are covered with a protective layer of soil or an asphalt layer. The leaching bed system now needs to be put in place so it can start to run through the septic tank and filter out any remaining solid particles and debris before water is released into the surrounding land.
Septic tanks need maintenance every couple of years, and this involves pumping them out so that they do not become full of sludge and solids that prevent the wastewater from flowing freely throughout the system. It is also important to have your tank inspected by a professional contractor every year for cracks or other signs of damage. If you make sure that your septic tank is installed correctly, then there won’t be any problems.
Septic tanks are essential in maintaining a healthy living environment on your property. It is vital to know the proper way to install a septic tank since there are many precautions that need to be taken before and during the installation process. In this article, we provided you with information about how septic tanks should be installed so that they work effectively for years without any problems or health hazards from sewage-contaminated water coming into contact with people who come near them. If you have noticed an unusual smell coming from your system lately, then let us know! We can arrange for our team of experts to inspect it and provide solutions if necessary according to what’s going wrong under the ground where nobody can see but everyone knows something smells bad! Contact us today.